Lexmark 3200 Series ColorFine Printer Driver
for Microsoft Windows NT
----------------------------------------------------------

Tips:

1) Many printing problems can be eliminated by setting
   Virtual Memory Initial Size to at least 48 MB.

   Hint:  Click Start/Settings/Control Panel; double-click
   on System and go to the Performance tab; in the Virtual
   Memory section, select the Change button; change the
   Initial Size of the Paging File Size for Selected Drive;
   then press the Set button.

2) To more quickly return to the application from printing
   a job, uncheck "Always spool RAW datatype".

   Hint:  Click Start/Settings/Printers; right-click
          Lexmark 3200 printer icon, then click Properties.
          Click the Print Processor button.

   Note:  For additional explanation on this subject, use
          context-sensitive help by clicking on the ? button,
          then clicking on "Always spool RAW datatype".

3) If you experience the problem of DOS jobs failing to print:
   This problem can occur when more than one printer driver is
   installed on a PC. To correct the problem, attach all other
   printer drivers to FILE: as follows:
   1. Click Start/Settings/Printers.
   2. Right-click on the printer and select Properties.
   3. Go to the Ports tab and select FILE: from the list of ports.
   4. Click on OK.
   5. Repeat steps 2-4 for all printers except the Lexmark
      3200 Series ColorFine.

4) If you are unable to select 1200 Dots Per Inch (DPI) from
   within applications, you may select 1200 DPI mode
   from the driver.

   To get 1200 DPI mode from the driver for all documents:

     Click Start/Settings/Printers; right-click on the
     Lexmark 3200 printer icon; click Document Defaults;
     go to the Advanced tab; select Print Quality of
     High 1200 dpi; then click OK.

   To get 1200 DPI mode for a particular application:

     Select <Print> from the application's file menu. Select
     <Properties> or <Setup>. In the <Advanced> tab of the user
     interface, open <Print Quality> and select <High 1200 dpi>.

5) There are four different print quality modes in the driver
   ranging from a "draft" mode to a 1200 DPI mode. The
   differences between these modes are in the dots per inch
   addressed, and the number of passes of the print head used
   to apply ink to the print medium. The greater the number of
   passes, the higher the print quality.

   Quick Print 600:  This is a 600x300 DPI high-speed "draft"
                     mode. All printing is done with one pass.
   Normal 600 dpi:   This is a 600x600 DPI mode. It is the
                     default for the driver. Printing is done
                     in either one or two passes, depending on
                     the print media used.
   Enhanced 600 dpi: This is a 600x600 DPI mode.  All printing
                     is done in four passes.
   High 1200 dpi:    This is the 1200x1200 DPI mode. All printing
                     is done in four passes.

6) If your job fails to print, uncheck "Always spool RAW datatype".

   Hint:  Click Start/Settings/Printers; right-click
          Lexmark 3200 printer icon, then click Properties.
          Click the Print Processor button.

7) Microsoft Word Users Only: If you want to print more than one 
   copy of your document, you must set the number of copies in the
   printer software before you open Word.

   To set the number of copies in the printer software:
   1.  Click Start/Settings/Printers.
   2.  Right-click on the Lexmark 3200 printer icon.
   3.  Choose Document Defaults from the sidebar menu.
   4.  On the Page Setup tab in the printer software, set the 
       number of copies.
   5.  Open your Word document and print.

8) If you experience horizontal lines in your printed output 
   resulting from pauses during printing of large, complicated 
   pages; you can minimize this problem by selecting the 
   following options:

   Click Start/Settings/Printers; right-click Lexmark 3200 
   printer icon, then click Properties.  Click the Print 
   Processor button.  Click on "Always spool RAW datatype".
   Click OK.

   On the Scheduling tab, select "Start printing after last page
   is spooled".

9) Some software packages will cover the entire screen. You can
   press Alt-Tab to toggle between open applications.

10) If you experience problems printing a multiple page document
    from Adobe Acrobat Reader 3.0, you can try printing one page
    at a time, or use Adobe Acrobat Reader 2.1.

11) Printing banner from PrintArtist 4.0:  To successfully print
    a banner in landscape mode from PrintArtist 4.0, Choose
    File-Print-Print Size.  Then, check the box 'Use Printable
    area values', then set the values for 'Left' and 'Right'
    to 0 and leave the 'Top' and 'Bottom' settings at the defaults.
    If you are printing a banner in protrait mode, it is not
    necessary to change the settings.



Lexmark, Lexmark with diamond design, and ColorFine are trademarks
of Lexmark International, Inc., registered in the United States
and/or other countries.

Color Jetprinter is a trademark of Lexmark International, Inc.

Windows is a registered trademark of Microsoft in the U.S. and 
other countries.

Other trademarks are the property of their respective owners.